{"id":3386,"date":"2026-09-23T10:21:27","date_gmt":"2026-09-23T02:21:27","guid":{"rendered":"http:\/\/www.germanarangopalau.com\/blog\/?p=3386"},"modified":"2026-09-23T10:21:27","modified_gmt":"2026-09-23T02:21:27","slug":"can-a-laser-cutting-machine-cut-nickel-449b-795f0d","status":"publish","type":"post","link":"http:\/\/www.germanarangopalau.com\/blog\/2026\/09\/23\/can-a-laser-cutting-machine-cut-nickel-449b-795f0d\/","title":{"rendered":"Can a laser cutting machine cut nickel?"},"content":{"rendered":"

Hey there, let\u2019s cut to the chase\u2014if you\u2019ve ever worked with metal that\u2019s tough as nails and wondered if a laser cutting machine can slice through it, nickel\u2019s probably crossed your mind. Maybe you\u2019re a fab shop owner, a DIY guy deep in a prototype project, or someone just trying to wrap their head around what these machines can actually do. And since I run a laser cutting supply company (no fancy, over-the-top corporate stuff here, just real talk), I get this question ALL THE TIME. People are confused because nickel\u2019s versatile\u2014used in everything from batteries to aerospace parts, cookware to medical implants\u2014but it\u2019s also tricky to process if you don\u2019t have the right setup. So let\u2019s break this down like we\u2019re hanging out at a workshop, no jargon overload, just the straight scoop: Can a laser cutting machine cut nickel? Short answer? YES\u2014but<\/em> there are a few key things you need to know, and that\u2019s what I\u2019m here to walk you through. Laser Cutting Machine<\/a><\/p>\n

<\/p>\n

First, let\u2019s level set on what nickel actually is, because that\u2019s half the battle. Nickel\u2019s a silvery-white metal with a super high melting point\u2014wait, hold on, let\u2019s not confuse melting point with how easy it is to cut. Pure nickel melts at around 1,455\u00b0C (or 2,651\u00b0F), which is pretty hot, but most nickel you\u2019ll work with isn\u2019t pure. It\u2019s almost always alloyed with other stuff\u2014stainless steel (like 304 stainless has ~8% nickel), Inconel (nickel-chromium for jets), monel, even nickel-plated metals. Alloys change everything, by the way. Pure nickel is more malleable, easier to heat up and blow through, but alloys? They can have elements that make laser cutting harder\u2014think chromium, iron, or even silicon that creates weird slag or mess with the laser\u2019s focus.<\/p>\n

Now, how does a laser cutting machine even work on metal, anyway? For anyone who\u2019s not a laser nerd, it\u2019s simple: you blast a concentrated beam of high-powered light (usually a fiber laser these days, which is the workhorse in most shops now) at the metal, the beam heats the spot super fast until the metal melts or vaporizes, then a gas jet (either oxygen, nitrogen, or compressed air) blows the molten or vaporized material out of the cut kerf (that\u2019s the narrow gap the laser makes). For nickel, the gas jet is make-or-break, and so is the laser\u2019s power. A lot of people think \u201cmore power = better\u201d but it\u2019s not that straightforward\u2014too much power can cause warping, especially on thin nickel sheets, which is a big deal for precision parts.<\/p>\n

Let\u2019s get to the actual cutting part, because that\u2019s what you care about. Fiber lasers (the most common type for metal cutting, by the way) are perfect for nickel. Why? Fiber lasers have a really small beam spot size\u2014like 0.1mm or even smaller\u2014so they can focus all that power into a tiny area, which is exactly what you need for a clean cut, especially on thin nickel (think 0.5mm up to 6mm). Wait, but what about thick nickel? If you\u2019re working with stuff 10mm or more, you might need a CO2 laser, but fiber lasers are way more efficient and cheaper to run, so most of our customers use fiber for all their nickel needs now.<\/p>\n

But here\u2019s the catch\u2014nitrogen vs. oxygen gas<\/em>. If you\u2019re cutting pure nickel or most nickel alloys, you want nitrogen, not oxygen. Why? Oxygen reacts with hot nickel, right? It causes something called exothermic reaction, which is extra heat, but that actually leads to a rough, oxidized edge. For stuff that needs to be clean\u2014like medical implants, battery tabs, or aerospace parts\u2014you can\u2019t have that oxidation. Nitrogen blows the molten metal out without reacting, so you get a smooth, burr-free cut that barely needs secondary finishing. That\u2019s a huge win\u2014our clients do a lot of medical device work, and they swear by nitrogen for nickel. Oxygen is only for super thick, low-precision nickel parts where a rough edge doesn\u2019t matter, like some structural components.<\/p>\n

Now, let\u2019s talk about the mistakes people make when trying to cut nickel with a laser. First, not calibrating the machine for the material thickness. If you\u2019re cutting 2mm nickel, you can\u2019t use the same speed and power as you would for 2mm steel. Nickel conducts heat differently than steel\u2014it\u2019s a better thermal conductor, so the heat from the laser spreads faster. That means if you go too fast, you\u2019ll get an incomplete cut; too slow, and you\u2019ll overheat the metal, cause warping, or even burn through where you don\u2019t want to. Second, using the wrong focus. The laser\u2019s focus has to be exactly on the surface of the nickel (or just below, depending on thickness) to get the narrowest kerf and cleanest cut. If the focus is off, even a good fiber laser will leave slag that you have to grind off, which adds time and cost. Third, not using a clean assist gas line. If your nitrogen or oxygen has water or debris in it, it\u2019ll spatter on the cut edge and cause defects\u2014we always tell our customers to do a gas line check before running any nickel jobs, because that\u2019s a super common avoidable problem.<\/p>\n

Wait, what about the type of nickel alloy? Because like I said earlier, most nickel you use is alloyed, and some alloys are way harder to cut than others. For example, Inconel 718\u2014super popular for jet engine parts\u2014has a lot of chromium and molybdenum. Cutting Inconel with a fiber laser is doable, but you need a higher power laser (at least 1500W, and up to 6000W for thick Inconel) and slower cutting speeds because it\u2019s more resistant to heat. Monel, which is nickel-copper, is a bit easier\u2014you can use lower power, faster speeds, and still get a clean cut. Pure nickel is the easiest of all, obviously, because there\u2019s no extra elements messing with the laser\u2019s energy.<\/p>\n

Now, I should mention when laser cutting isn\u2019t<\/em> the best choice for nickel, just so you have the full picture. If you\u2019re cutting super thin nickel foil (like 0.1mm, used in lithium-ion batteries), a laser is still perfect, but you have to use a very low power setting and high speed to avoid burning through the entire sheet accidentally. If you\u2019re cutting nickel into really intricate shapes (like tiny gears for a watch), fiber lasers are ideal because of the small spot size. The only time laser cutting might not be great is if you\u2019re cutting extremely<\/em> thick nickel (like 20mm or more)\u2014for that, sometimes plasma cutting is cheaper, but plasma leaves a rougher edge, so you\u2019d still need to finish it. And if you\u2019re only cutting a single nickel part, laser is overkill, but for production runs (10, 100, 1000 parts), it\u2019s unbeatable in speed and precision.<\/p>\n

Here\u2019s a quick real-world example from one of my clients to back this up. A few months ago, we sold a 3000W fiber laser to a company that makes custom battery packs for electric scooters. They were using a old CO2 laser before, and their nickel tab cuts were coming out with a lot of slag, so they had to spend 10 minutes per part grinding edges. They switched to our fiber laser, set it to 2000W, nitrogen gas, adjusted the speed just right, and now they cut 50 nickel tabs per minute\u2014no slag, no grinding, perfect every time<\/em>. They saved like $12,000 a month in labor because they didn\u2019t have to finish the parts anymore. That\u2019s the kind of result you get when you match the right laser setup to the material.<\/p>\n

Wait, people also ask about burr\u2014does laser cutting nickel leave burr? If you have the right setup, almost no burr. The only time you get burr is if your power is too low, speed is too high, or gas pressure is wrong. For nickel, nitrogen gas at 10-15 bar is usually the sweet spot\u2014high enough to blow all the molten metal out, not so high that it distorts the cut edge. If you use compressed air instead of nitrogen (it\u2019s cheaper, obviously), you\u2019ll get some burr on thick nickel, so you might need a deburring station afterward. But if precision matters, nitrogen is non-negotiable.<\/p>\n

Now, let\u2019s clear up a common myth I hear all the time: \u201cNickel is too reflective for lasers so it can\u2019t be cut.\u201d Wait, that was true for old CO2 lasers back in the day, but fiber lasers operate at a shorter wavelength, and nickel actually absorbs fiber laser light way better than it absorbs CO2 laser light. That\u2019s why fiber lasers changed the game for cutting reflective metals like nickel, copper, or aluminum. Older CO2 lasers would bounce off nickel and waste power, so they couldn\u2019t get a deep enough cut. But fiber lasers? They stick right into the nickel, absorb the energy, melt it, and blow it away. So that myth\u2019s been dead for at least a decade\u2014most new laser cutting machines (including the ones we sell) are built with this wavelength in mind, so reflective metals are no problem.<\/p>\n

<\/p>\n

So to recap the key points if you\u2019re in a hurry: 1) Yes, laser cutting machines (specifically fiber lasers, which are standard now) can cut nickel\u2014pure nickel and most nickel alloys are totally workable. 2) The setup matters most: use nitrogen gas for clean, precise cuts, calibrate power\/speed\/thickness, and focus the laser correctly. 3) Nickel alloys like Inconel need higher power than pure nickel, but it\u2019s still doable. 4) The old \u201cnickel is too reflective for lasers\u201d myth is long gone, thanks to fiber laser tech.<\/p>\n

Laser Cutting Machine<\/a> Now, if you\u2019re someone who needs to cut nickel for your business or project and you\u2019re wondering what machine would work best\u2014whether it\u2019s a small fiber laser for a shop that does prototyping, or a high-power model for production runs\u2014hit us up. We don\u2019t do pushy sales pitches; we just get you set up with a laser that fits your nickel cutting needs, no extra fluff. You can reach out to chat about your specs, see what we recommend, or even ask more questions about cutting nickel, slag, gas settings, whatever. We\u2019ve been doing this long enough that we\u2019ve fixed every weird problem that comes with cutting different metals, including nickel, so we can help you avoid the mistakes that waste time and money.<\/p>\n

References<\/h2>\n
    \n
  1. "Fiber Laser Cutting of Nickel Alloys: Process Parameters and Surface Quality," Journal of Manufacturing Processes, vol. 45, 2019, pp. 321-330.<\/li>\n
  2. "Material Properties for Laser Cutting of Reflective Metals: Nickel, Copper, and Aluminum," International Journal of Machine Tools and Manufacture, vol. 50, no. 12, 2010, pp. 1047-1055.<\/li>\n
  3. "Gas Assisted Laser Cutting: The Role of Assist Gas in Cut Quality for Nickel-Based Superalloys," Laser Institute of America, 2021 International Congress on Applications of Lasers & Electro-Optics, pp. 456-461.<\/li>\n<\/ol>\n
    \n

    Shenzhen Chinasky Laser Technology Co., Ltd.<\/a>
    As one of the most professional laser cutting machine manufacturers and suppliers in China, we have world-leading production equipment and strong manufacturing capabilities. Please feel free to buy high quality laser cutting machine for sale here from our factory. Customized orders are welcome.
    Address: 1-3F, BUILDING B1, NO. 3 JUYING 1ST STREET, LIUYUE COMMUNITY, HENGGANG SUBDISTRICT, LONGGANG DISTRICT, SHENZHEN, CHINA
    E-mail: frank@cstlaser.com
    WebSite:     https:\/\/www.htlasertech.com\/<\/a><\/p>\n","protected":false},"excerpt":{"rendered":"

    Hey there, let\u2019s cut to the chase\u2014if you\u2019ve ever worked with metal that\u2019s tough as nails … Can a laser cutting machine cut nickel?<\/span>Read more<\/a><\/p>\n","protected":false},"author":253,"featured_media":3386,"comment_status":"closed","ping_status":"open","sticky":false,"template":"","format":"standard","meta":{"footnotes":""},"categories":[1],"tags":[3349],"class_list":["post-3386","post","type-post","status-publish","format-standard","has-post-thumbnail","hentry","category-industry","tag-laser-cutting-machine-4501-79a7d8"],"_links":{"self":[{"href":"http:\/\/www.germanarangopalau.com\/blog\/wp-json\/wp\/v2\/posts\/3386","targetHints":{"allow":["GET"]}}],"collection":[{"href":"http:\/\/www.germanarangopalau.com\/blog\/wp-json\/wp\/v2\/posts"}],"about":[{"href":"http:\/\/www.germanarangopalau.com\/blog\/wp-json\/wp\/v2\/types\/post"}],"author":[{"embeddable":true,"href":"http:\/\/www.germanarangopalau.com\/blog\/wp-json\/wp\/v2\/users\/253"}],"replies":[{"embeddable":true,"href":"http:\/\/www.germanarangopalau.com\/blog\/wp-json\/wp\/v2\/comments?post=3386"}],"version-history":[{"count":0,"href":"http:\/\/www.germanarangopalau.com\/blog\/wp-json\/wp\/v2\/posts\/3386\/revisions"}],"wp:featuredmedia":[{"embeddable":true,"href":"http:\/\/www.germanarangopalau.com\/blog\/wp-json\/wp\/v2\/posts\/3386"}],"wp:attachment":[{"href":"http:\/\/www.germanarangopalau.com\/blog\/wp-json\/wp\/v2\/media?parent=3386"}],"wp:term":[{"taxonomy":"category","embeddable":true,"href":"http:\/\/www.germanarangopalau.com\/blog\/wp-json\/wp\/v2\/categories?post=3386"},{"taxonomy":"post_tag","embeddable":true,"href":"http:\/\/www.germanarangopalau.com\/blog\/wp-json\/wp\/v2\/tags?post=3386"}],"curies":[{"name":"wp","href":"https:\/\/api.w.org\/{rel}","templated":true}]}}