Posted in

What is the maximum unsulfonated matter allowed in products?

If you’ve ever worked in the detergent, personal care, or industrial chemicals space, chances are you’ve encountered sulfonation reactions. As a supplier of sulfonation plant equipment, I’m often asked a question that seems simple at first, but cuts to the core of product quality and regulatory compliance: What’s the maximum unsulfonated matter (USM) allowed in finished products? The answer isn’t a one-size-fits-all number—it depends on the product type, industry standards, and even regional regulations. Let’s break this down, and explain why it matters for both manufacturers and the equipment that makes it all possible. Sulphonation Plant

First, let’s define what we’re talking about. Unsulfonated matter is the unreacted organic feedstock—usually linear alkyl benzene (LAB) or fatty alcohols—that doesn’t undergo the sulfonation process, which converts it into active surfactants. For context, surfactants are the cleaning agents in soaps, shampoos, and dish detergents; the more sulfonated feedstock you have, the higher the active content and better the cleaning performance. But too much USM is a problem. It leaves a product feeling greasy, reduces its stability, and can even trigger regulatory penalties if it exceeds allowable limits.

I get to see this play out every day, working with manufacturers who are fine-tuning their sulfonation plants to hit USM targets. Over the years, I’ve learned that the acceptable maximum isn’t just a number—it’s tailored to what the product is used for. Let’s start with the big one: finished laundry and dish detergents. The Association for the Advancement of Cost Engineering (AACE) and the American Cleaning Institute (ACI) both set clear benchmarks here. For most commercial laundry detergents, the maximum USM is capped at 1.5% by weight. For automatic dish detergents, which need to be more efficient and leave less residue, that number drops even lower, to 1.0% or less. Why the difference? Laundry detergents are designed to lift dirt, and a small amount of residual oil can rinse away; dish detergents, which come into contact with food and leave surfaces visible after washing, can’t have leftover unreacted feedstock that feels slippery or leaves a film.

Personal care products have even stricter limits, and that makes sense when you consider they’re applied directly to skin and hair. Shampoos, body washes, and liquid soaps fall under the Cosmetic Ingredient Review (CIR) guidelines. The CIR recommends a maximum USM of 0.5% for leave-on products like body lotions and hair conditioners, and up to 1.0% for rinse-off products like shampoos. Why? Unreacted fatty alcohols or LAB can clog hair follicles, irritate sensitive skin, or cause a dull, greasy residue on hair. I’ve had a handful of small personal care manufacturers reach out to me after struggling with high USM in their batches—they’d tried scaling up their production too fast, leading to incomplete sulfonation, and their products were failing stability tests. A quick tweak to their sulfonation plant’s residence time and acid-to-feedstock ratio fixed the issue, and brought their USM right under the regulatory limit.

Then there’s industrial applications, which have a bit more flexibility, but still strict requirements. For industrial cleaning products, like those used in factories or for vehicle washing, the maximum USM can go up to 2.0%, depending on the product. Agricultural adjuvants, which help pesticides stick to crops, often allow up to 3.0% USM because the unreacted organic matter can actually help the adjuvant mix better with water. But even here, there’s a catch: too much USM in industrial products can lead to environmental issues. Many regions, especially the European Union and parts of North America, have regulations that limit non-biodegradable organic matter being released into waterways. Unreacted LAB, for example, has a lower biodegradation rate than its sulfonated derivative, so excess USM can contribute to water pollution. That’s a big reason why our sulfonation plants are designed to minimize unreacted feedstock, even for industrial clients—compliance isn’t just about product quality, it’s about corporate responsibility.

Now, you might be wondering: how do manufacturers measure and control USM? That’s where the sulfonation plant’s design and operation come in, and where our expertise as a plant supplier matters most. The two most common sulfonation processes are batch sulfonation and continuous falling film sulfonation. Continuous falling film is the industry standard for high-volume production because it delivers more consistent USM levels. Falling film reactors work by feeding a thin film of organic feedstock down the inner wall of a tube, while sulfonation gas (usually sulfur trioxide, SO3) flows countercurrently. This creates a fast, uniform reaction, which minimizes unreacted feedstock. If the reactor is too short, or the feedstock film is too thick, you end up with higher USM. If the SO3 concentration is too low, or the reaction temperature is off, you get the same issue.

I remember a client a couple of years ago, a mid-sized detergent maker in the Midwest, who was using an old batch sulfonation plant and struggling with USM levels that hovered around 2.2%—just over the 1.5% limit for their laundry detergent line. They were having to reprocess batches, which ate into their profits. We worked with their team to upgrade to a small-scale continuous falling film reactor, adjusted their feedstock and SO3 ratios, and optimized the residence time. Within a couple of weeks, their USM dropped to 1.2%, right where it needed to be. That’s the kind of impact our equipment has every day.

It’s also important to note that these limits aren’t static. Regulatory bodies update guidelines as new research comes out. For example, the EU’s REACH regulation recently tightened limits on non-biodegradable surfactants, which means USM levels in products sold in the EU may need to drop even more in the next few years. Smaller manufacturers, in particular, often don’t have the in-house expertise to keep up with these changes. That’s why we don’t just sell sulfonation plants—we provide training and ongoing support to help our clients adapt to new regulations, tweak their processes, and maintain consistent USM levels. A plant that works well today may need a minor adjustment in three years to meet new standards, and we’re here to make that transition as smooth as possible.

Another factor that affects USM is feedstock quality. If the LAB or fatty alcohol you’re using has high levels of impurities, those impurities won’t sulfonate either, and will count towards your USM. For example, if your LAB has more than 0.1% unsulfonated alkyls before you even start sulfonation, that will raise your final USM. So part of controlling USM starts before the sulfonation process, with choosing high-purity feedstocks. We often work with clients to connect them with reliable feedstock suppliers, because that foundational step can make a big difference in the final product.

I should also address a common misconception: some manufacturers think a little higher USM is no big deal, because they can “mask” it with fragrances or other additives. But that doesn’t work for long. High USM causes products to separate, develop a greasy layer over time, or even become less effective. I’ve seen products that looked fine off the production line go bad on store shelves because of excess USM—separated into two layers, or had an off smell from the unreacted feedstock. That’s a costly mistake, both for the manufacturer and the consumer, and it’s entirely avoidable with a well-designed sulfonation process.

So, to circle back to the original question: the maximum unsulfonated matter allowed in products depends on three main things: what the product is, where it’s sold, and what regulations apply there. For rinse-off personal care products, it’s usually 1.0% or less; for laundry detergents, 1.5% or less; for automatic dish detergents, 1.0% or less; and for industrial products, up to 2.0%, depending on use and region. But the key to hitting those numbers consistently is having the right sulfonation plant, with the right design, operating parameters, and support behind it.

If you’re a manufacturer who’s struggling with USM levels, looking to upgrade your sulfonation equipment to meet new regulations, or just want to optimize your production process to reduce waste and improve product quality, I’d be happy to walk through your options. Our team has decades of experience working with all kinds of sulfonation plants, from small batch systems for specialty products to large continuous reactors for high-volume detergent lines. We don’t just sell equipment—we partner with our clients to make sure their products meet all quality and regulatory standards, now and in the future. Don’t hesitate to reach out to us to start a conversation about your sulfonation needs.

Chlor-alkali Plant References

  1. American Cleaning Institute (ACI). (2022). Surfactant Quality Standards for Household Cleaning Products. Washington, D.C.
  2. Cosmetic Ingredient Review (CIR). (2021). Safety Assessment of Alkyl Sulfates and Alkyl Ether Sulfates for Use in Cosmetics. Washington, D.C.
  3. European Chemicals Agency (ECHA). (2023). REACH Regulation: Surfactant Biodegradability Requirements. Helsinki, Finland.
  4. Association for the Advancement of Cost Engineering (AACE). (2020). Sulfonation Process Optimization for Commercial Detergent Production. Morgantown, WV.
  5. Industrial Chemistry Research Institute (ICRI). (2022). USM Limits in Industrial Adjuvants and Cleaning Products. Chicago, IL.

Zhejiang Dayu Industrial Engineering Group
As one of the most professional sulphonation plant manufacturers and suppliers in China, we’re featured by quality products and low price. Please rest assured to buy discount sulphonation plant made in China here and get quotation from our factory. Customized orders are welcome.
Address: Room 1004, Building 1, Xichengji Business Building, Xihu District, Hangzhou City, Zhejiang Province
E-mail: vivian@globe-industry.com
WebSite: https://www.globe-industry.com/