If you’re a silk twister, textile manufacturer, or someone just stepping into the luxury silk production space, you know that a mis-threaded twisting machine can derail an entire batch—wasting hours of raw silk, energy, and raw material. As a supplier of silk twisting machines, we hear this every day: even operators who’ve been running these machines for years can hit a snag when threading, especially with the delicate, fine silk fibers that demand precision no other fabric requires. Unlike cotton or polyester, silk is a protein fiber; it’s smoother, more fragile, and prone to snags, breaks, or uneven tension if threaded incorrectly. That’s why we put together this step-by-step guide, tailored specifically for our machines and any standard vertical silk twisting model, to walk you through the process safely and accurately. Silk Twisting Machine

First, before you even touch the thread, let’s talk about pre-thread prep. This is the part most operators skip, and it’s the root of 70% of thread breaks we see in the field. Raw silk comes in hanks, right? First, you need to rewind those hanks into individual cones—small, uniform spools that fit onto the machine’s creel. Don’t skip rewinding: hanks are looped, and pulling a thread directly from a hank will cause constant tension spikes, leading to breaks during twisting. When rewinding, use a low-tension rewinder set to just enough pressure to hold the thread tight without compressing it; silk fibers can stretch up to 20% when wet, but when dry, they’re brittle, so excess tension will snap them. Also, inspect each thread before it reaches the creel: snip off any knots, loose ends, or tiny tangles. Silk is delicate, and even a 1mm knot will catch on the machine’s guides mid-twist, causing a break. We always recommend using 100% degummed silk for twisting too—degumming removes the sericin (the sticky protein coating on raw silk), which makes the thread smoother and less likely to cling to machine parts. If you’re working with undegummed silk, you’ll need extra lubrication on the guides, but even then, threading is riskier.
Next, set up the creel. The creel is the rack that holds your supply cones, and its height and angle matter more than you might think. Position the creel so that the center of each cone’s spindle is level with the center of the twisting machine’s top guides. If the creel is too low, the thread will pull downward at an angle, creating side tension that leads to uneven twists; too high, and the thread will have a droop, tangling on itself before it even reaches the first guide. For most of our standard 2-spindle and 4-spindle twisting machines, the creel should be positioned 12 to 18 inches away from the machine’s front face. Also, make sure each cone spins freely on its spindle—lock the spindle nut just tight enough to keep the cone from wobbling, but not so tight that it can’t rotate when pulled. Wobbly cones will cause fluctuations in thread tension, resulting in a twisted yarn with inconsistent thickness, which can ruin your finished product.
Now, let’s get to threading, step by step, starting from the creel and moving down to the twisting head. This is where precision is key. The order of the guides matters—skip one, and you’ll end up with a thread that’s either too loose or too tight. Let’s break it down for a basic vertical ring twisting machine, the most common type for small to mid-scale silk production:
- Start at the supply cone on the creel. Pull 12 to 18 inches of thread from the cone’s top (not the side—pulling from the side causes the cone to spin unevenly). Don’t pull hard; just enough to keep the thread taut without stretching it.
- Thread the thread through the first guide: the yarn guide on the creel, which is usually a ceramic eyelet (never use metal guides for silk—metal is abrasive and will fray silk fibers over time). The creel’s yarn guide is designed to keep the thread straight as it leaves the cone, so make sure the thread passes through the exact center of the eyelet—off-center will cause friction.
- Next, move to the tension regulator. Silk twisting machines have a small lever or screw tensioner just after the creel guide. For fine silk (10 to 20 denier), set the tension to light—we recommend 10 to 15 grams of tension, which is roughly the weight of a paperclip. For thicker silk (20 to 40 denier), bump it up to 20 to 25 grams. If tension is too high, the thread will snap mid-twist; too low, and the final twisted yarn will be loose and stretchy, unsuitable for high-end textiles. Pro tip: test the tension by holding a 10cm length of thread from the tensioner—if it breaks under light pressure, it’s too tight.
- Now, thread the next guide: the traversing guide, located 6 to 12 inches above the ring rail. The traversing guide’s job is to evenly distribute the thread along the ring’s surface, preventing it from building up in one spot. Pass the thread through the ceramic eyelet of this guide, making sure it aligns with the same vertical axis as the creel guide—no twists or kinks here.
- Next, comes the ring rail. The ring rail is the circular component that holds the traveler, a small metal hook that twists the yarn as it moves. First, thread the thread through the traveler: the traveler is a tiny, U-shaped hook that sits inside the ring on the ring rail. To thread it, tilt the ring rail slightly toward you, and carefully guide the thread through the open end of the traveler. Don’t force it—if you’re having trouble, use a small threader tool (most machine suppliers include one with the machine) to feed the thread through. Once the thread is through the traveler, pull it tight so it stays in place.
- Finally, thread the yarn take-up guide, which is above the ring rail. This guide pulls the finished twisted yarn onto your take-up spool. Pass the thread through this guide, then tie it securely to the take-up spool’s core. Make sure the knot is small and tight—silk knots can be untied by the machine’s tension if they’re loose, leading to the yarn slipping.
Once you’ve threaded the machine, you need to test it to make sure the tension and twist are correct. Run the machine at slow speed (100 to 200 RPM) for 5 to 10 minutes, then stop and inspect the yarn. If you see breaks, check each guide for snags—sometimes a tiny piece of lint or a rough edge on a ceramic eyelet will catch the thread. If the yarn is uneven, adjust the tension: increase it if it’s too loose, decrease if it’s breaking constantly. Also, check the traveler: make sure it’s the correct size for your thread thickness. A traveler that’s too heavy will pull too tight, causing breaks; too light, and it won’t twist the yarn properly. We offer a full range of travelers for our machines, so just reach out if you need help matching the right size.

As a silk twisting machine supplier, we’ve seen how even a small mistake in threading can lead to major headaches for operators. That’s why every machine we sell comes with a printed step-by-step threading guide, plus access to our technical support team for troubleshooting. Whether you’re a small boutique silk producer or a large textile mill, the right threading technique will save you time, reduce waste, and produce a higher-quality twisted yarn. If you’re looking to upgrade your existing silk twisting machine, need spare parts, or want to learn more about optimizing your production process, we’d be happy to discuss your needs.
Silk Machinery References
- Textile Institute. (2018). Silk Processing: Principles and Practices. Woodhead Publishing.
- Japanese Textile Machinery Association. (2020). Guidelines for Threading and Maintaining Ring Twisting Machines for Fine Natural Fibers. JSTA Technical Bulletin No. 47.
- Smith, A. (2019). Troubleshooting Silk Yarn Production: Common Causes of Thread Breaks and Solutions. Journal of Textile Engineering, 65(3), 45-52.
- International Silk Association. (2021). Best Practices for Degumming and Twisting Silk Fibers. ISA Industry Guide Series.
Haining Defuli Intelligent Equipment Co., Ltd.
As one of the most professional silk twisting machine manufacturers and suppliers in China, we’re featured by quality products and good service. Please rest assured to buy customized silk twisting machine made in China here from our factory. Welcome to contact us for pricelist.
Address: No.8-1, Anlan Road, Chang’an Town (Agricultural Development Zone), Haining City, Zhejiang Province, China
E-mail: Jiajie.jin@fukang-china.com
WebSite: https://www.cndefuli.com/