Posted in

How to deal with over – temperature problems in a Withdrawable Switchgear?

As a withdrawable switchgear supplier, I’ve spent years talking with plant operators, maintenance teams, and facility managers who pull their hair out over over-temp issues. It’s not just a “minor annoyance” either—overheating can spark trips, cut production, or even lead to catastrophic failures that cost hundreds of thousands in downtime. Today, I’m breaking down exactly how we (as someone who builds and supports these units) fix and prevent over-temp problems, no stuffy tech jargon. Withdrawable Switchgear

First, let’s cut to the chase: the #1 cause of overheating in withdrawable switchgear isn’t magic—it’s bad connections. Think of your withdrawable unit like a big Lego brick that slides into the main cubicle. If those contact fingers (the metal bits that make the electrical connection) are dirty, bent, or not seating all the way, you get extra resistance. And resistance = heat. Last year, a factory in Ohio had a 12-hour shutdown because their unit’s secondary contacts were caked in dust from sawdust in their warehouse. They tried tightening bolts, but that didn’t fix the bad connection—turns out the unit’s internal contacts were never properly cleaned during commissioning. Our team hopped on-site, did a full contact inspection, cleaned the fingers with isopropyl alcohol, and tightened the torque specs to manufacturer levels (12 ft-lbs, for the curious) and that temp dropped 18 degrees within a week. Pro tip: do a contact torque check every time you withdraw/insert the unit—every 6 months is standard for industrial sites with high use.

Next up: ventilation. A lot of people see their switchgear box and think “tightly sealed = safe,” but no—these units carry big currents, and that current turns into heat. If the ventilation grills are blocked by cable ties, dust, or even stacked boxes on top of the cubicle, that heat can’t escape. I worked with a food processing plant in Texas that kept their switchgear in a back utility room. Their air conditioning unit broke for 3 days, and the switchgear grills were covered in flour dust from the production line. The internal temp hit 150°F, which is way over the safe limit (we recommend staying below 104°F for standard units). We had them install mesh filters (easy to clean monthly) and relocate a small fan to pull cool air in, and their over-temp alerts never went off again. Don’t forget to check the internal cooling fans too—if they’re spinning slow or making weird noises, replace them. We see a lot of operators ignore fan maintenance until it’s too late.

Then there’s load issues. Your withdrawable switchgear is rated for a specific max current—if you’re running more power through it than it’s built for, it’s gonna overheat. Last quarter, a pharmaceutical company expanded their production line and didn’t upgrade their switchgear. They added 20% more load to their existing unit, and over-temp started happening during peak hours. We had a team run a thermal scan (using a FLIR camera, super handy) and confirmed the busbars inside the unit were getting too hot. The fix? They either downsized their new equipment or got a higher-rated withdrawable unit from us. Simple as that—don’t push your gear past its limits. If you’re not sure what your unit’s rating is, pull up the serial number (it’s on the side of the cubicle) and we can look it up fast.

Wait, what about old units? A lot of our customers have withdrawable switchgear that’s 15+ years old. Those units wear out over time—the contact fingers get pitted from arcing, the insulation degrades, and the cooling systems get clogged. We offer a retrofitting service for these units—we’ll replace the contacts, clean the busbars, and upgrade the ventilation to bring old gear up to modern safety standards. A mining company in Canada had a 20-year-old unit that was running 25 degrees over temp. We retrofitted it, and now it’s within safe limits again, so they didn’t have to shell out for a whole new unit. That’s a big win—retrofitting is usually half the cost of a new unit.

Now, how do you catch overheating before it becomes a problem? Thermal scanning is your best friend. We recommend doing a scan every 6 months, especially if your gear is in a dusty, hot, or high-use environment. Thermal cameras show you hot spots you can’t see with the naked eye—like a contact that’s just starting to wear out before it sparks. We offer on-site thermal scans for all our customers, no matter where they’re located. Just shoot us a message, and we can schedule a time that works for your maintenance schedule.

Also, don’t sleep on regular cleaning. When was the last time you took out your withdrawable unit, flipped it over (carefully, it’s heavy!), and blew out the dust with compressed air? We see a lot of operators who only clean their gear when something breaks. But dust is a conductor—so dust buildup can make connections worse. Every quarter, do a quick visual check: pull out the unit, look at the contacts, blow out the grills, and make sure nothing is loose. It takes 15 minutes, and it can save you from a big shutdown.

I know maintenance feels like a chore, but over-temp issues are avoidable. A lot of the time, it’s just small things—tightening a bolt, cleaning a grill, checking a fan—that make all the difference. If you’re dealing with overheating right now, don’t wait until it’s a crisis. Reach out, and we can help you troubleshoot, whether that’s a quick check over, a retrofit, or a new unit if you need it. We work with facilities of all sizes, from small warehouses to big factories, so no job is too big or too small. We’ll walk you through every step, no confusing tech talk, and make sure your switchgear runs safe and smooth.

Fixed Type Switchgear References

  1. International Electrotechnical Commission. IEC 62271-200: High-voltage switchgear and controlgear, Part 200: AC metal-enclosed switchgear and controlgear for rated voltages above 1 kV and up to and including 52 kV, 2020.
  2. IEEE Std C37.20.2: IEEE Standard for Metal-Clad Switchgear, 2015.
  3. Schneider Electric. Switchgear Overheating Prevention and Maintenance Guide, 2022.
  4. National Electrical Manufacturers Association. Withdrawable Switchgear Application and Maintenance Practices, 2021.

Zhejiang Dongyu Electric Co., Ltd.
As one of the most professional withdrawable switchgear manufacturers and suppliers in China, we’re featured by quality products and good price. Please rest assured to buy customized withdrawable switchgear made in China here from our factory. Also, pricelist is available.
Address: No.11 Baoqiao Road, Huaxi Industrial Park, Changxing County, Zhejiang Province
E-mail: dongyu178@163.com
WebSite: https://www.dongyuswitch.com/