Hey there, it’s Jake from the connector squad—y’know, the guys you hit up when you need those tiny, reliable 1.0mm pitch parts that make your designs work without taking up half the PCB. If you’ve ever dug into miniaturized electronics, you’ve probably stumbled on “1.0mm pitch connectors” and thought, “Wait, there’s more than one kind?” Spoiler: There totally is. Over the years, I’ve fielded so many questions from engineers, product designers, even hobbyists who mix these types up, so let’s break ‘em down like we’re chatting over coffee—no boring jargon, just real talk from someone who’s been shipping these connectors for 8 years. 1.0mm Pitch Connectors

First, let’s get the basics out of the way quick: 1.0mm pitch is just the distance between the center of one connector pin (or solder point) to the next. It’s the sweet spot for tiny electronics—think wearables, smartphone camera modules, drones, even the fancy stuff like medical implant devices. Too tight (smaller pitch) and you’re fighting solder bridges, too loose and you’re wasting space. That’s why 1.0mm is everywhere, but not every 1.0mm connector is made the same. Let’s dive into the most common types you’ll actually run into.
The big one? Board-to-board (BTB) 1.0mm connectors. These are the workhorses, right? They connect two printed circuit boards (PCBs) together—like the main logic board in a smart watch to the display board, or a drone’s flight controller to the GPS module. What makes our BTBs different from the cheap no-name ones you find on Amazon? We’ve got two main styles here: right-angle and vertical. Vertical is when the connector sits straight up from the PCB—great for tight spaces where you don’t want it sticking out. Right-angle is when it’s perpendicular, perfect if you need to route a cable or another component right next to the board without overlapping pins. Wait, and don’t sleep on the “half-stack” vs. “full-stack” BTBs—half-stack is shorter, like 2mm total height, ideal for super slim devices, while full-stack is 4mm, better for when you need a sturdier connection that can handle a little more vibration (like drones that bounce around). One thing I hear all the time: “Do your BTBs handle high temp?” Yeah, our ones are rated up to 125°C, so they work in automotive stuff too, not just phones.
Next up, wire-to-board (WTB) 1.0mm connectors. These are for when you’re connecting a PCB to a wire harness instead of another board. Think about a Bluetooth earbud’s battery connecting to the main PCB, or a fitness tracker’s heart rate sensor wire hooking up to the logic board. WTBs use crimped contacts that you slide insulated wires onto, then lock into the connector housing. The cool thing here is you can customize wire length easily, which is why a lot of small-batch designers love these. We offer two types of WTB housings: straight and angled, too. Straight is for when you want the wire to run parallel to the PCB, angled is if you need it to run off to the side so it doesn’t block another part. Pro tip from my team: If you’re dealing with stranded wire, make sure you’re using a WTB with serrated contacts—they bite into the wire insulation a little for a way stronger hold, no accidental disconnects mid-test.
Then there’s cable-to-cable (CTC) 1.0mm pitch connectors. These are less common than BTB or WTB, but when you need to connect two wire assemblies without any PCBs in between, this is your guy. Think about connecting two display panels in a large smart TV, or a portable speaker’s amplifier wire to its battery wire. CTCs use the same crimped contacts as WTBs, but they’re designed to mate with a matching connector on the other cable, no PCB required. A lot of people mix these up with WTBs, but the difference is WTB has a PCB mount tail, CTC is all cable on both ends. We’ve shipped a ton of these to audio equipment makers lately because they’re way easier to assemble on a manufacturing line than soldering every wire individually.
Wait, hold on—can I skip the tiny ones? No, I can’t, because micro coaxial (micro coax) 1.0mm connectors are a whole separate category, and they’re non-negotiable for high-frequency stuff. If you’re working on a device that needs to transmit data fast—like a 5G module, a WiFi 6 chip, or a camera sensor that shoots 4K video—you’re going to use micro coax 1.0mm connectors. These are built for single (or sometimes dual) coaxial cables, so they block signal interference way better than standard pin connectors. The pitch here still hits 1.0mm, but the contact is a central pin surrounded by a shield, so you don’t get signal dropout when you’re passing data at gigabit speeds. A mistake new designers make here is using a standard BTB instead—big no-no, because your 5G module will work half as well or not at all. Our micro coax connectors are tested to 10GHz, so they handle all the high-speed stuff people are building now.
Now, let’s talk about what makes these types different beyond just their use case—key specs that matter, because a 1.0mm connector isn’t just a number. First, current rating: BTBs can handle up to 2A per pin, WTBs a little less, around 1.5A, micro coax is lower, like 0.5A, because they’re for signal, not power. Then there’s insertion force—you don’t want a connector that’s so hard to plug in your fingers cramp, but you also don’t want it falling out when you drop the device. Our BTBs have an insertion force of 5N per pair, which is just right—easy enough for a factory worker to assemble quickly, strong enough to not come loose. And don’t forget locking mechanisms! Some connectors have friction locks (just a little tab that clicks when it mates), others have latches (a little plastic lever you flip to secure it) for applications that get moved around a lot, like wearables that you take on and off your wrist. We make both, so you can pick what fits your build.
Wait, I should also clear up a myth I hear all the time: “1.0mm pitch is the same across all manufacturers.” Nope. Some no-name brands cut corners on the housing material, using cheap plastic that cracks when you insert it too hard, or contacts made of copper alloy that tarnishes over time, leading to bad connections. Our connectors use high-temperature nylon (PA66) housings, which are heat-resistant and super tough, and gold-plated copper contacts—gold doesn’t corrode, so even after 10,000 mating cycles, they still work like new. We’ve tested this, too—no flimsy parts here, which is why a lot of big OEMs (not just startup guys) work with us.
So when do you pick which type? Let’s make a quick cheat sheet to make it easy: If you’re connecting two PCBs = BTB. If you’re connecting a PCB to a wire = WTB. If you’re connecting two wires = CTC. If you’re working with high-speed signal (camera, 5G, WiFi) = micro coax. That’s it—no overcomplicating it.
Now, if you’re reading this and you’re in the middle of designing a new device, or you’ve been having issues with a connector that keeps failing, let’s talk. We’ve helped hundreds of designers switch to better 1.0mm connectors, cut their assembly time, and reduced their failure rates by a ton. Whether you need a sample to test, a custom run for a small batch, or a bulk order for your next production line, we’ve got you. No hoops, no weird minimum orders that are impossible for a startup, just honest pricing and parts that work as advertised.

So if you’re ready to stop messing with subpar connectors and get ones that are made for your build, hit us up. We’ll help you pick the right type, send over samples, and answer every question you have—no salesy nonsense, just real advice from people who know connectors inside and out.
Automotive Lighting Connector References
Hirose Electric Co., Ltd. (n.d.). 1.0mm Pitch Connectors: Application Guidelines.
TE Connectivity. (2022). Miniature Connector Technology for Wearable Electronics.
IPC-A-610. (2021). Acceptability of Electronic Assemblies.
Zhejiang AMA&Hien Technology Co., Ltd.
We are one of the most professional 1.0mm pitch connectors manufacturers in China since 1989, specialized in providing high quality customized products for global clients. We warmly welcome you to buy cheap 1.0mm pitch connectors made in China here from our factory.
Address: Puqi Special Industrial Zone, Yueqing City, Zhejiang Province, China
E-mail: huangyimeng@ama.com.cn
WebSite: https://www.amaelec.com/